| Power supply voltage |
85 [Vac] ÷ 265 [Vac] |
| Separated logic power supply |
24 [Vcc] ÷ 24 [Vcc] |
| Output current |
0.0 [A/ph rms] ÷ 5.2 [A/ph rms] 0.0 [A/ph peak] ÷ 7.35 [A/ph peak] |
| Control mode |
Clock & Direction |
| Feedback Interface |
isolated interface for incremental encoder 5V differential RS422 or 5V Single -Ended (TTL/CMOS) +output encoder not isolated 5V Differential RS422 +absolute encoder isolated input SSI or BISS |
| Mounting |
Wall mounting |
| Digital inputs |
4 optoisolated inputs 2-24 Vdc NPN, PNP or Line-Driver 2 MHz |
| Digital outputs |
3 digital optoisolated outputs PNP, 24 Vdc - 100 mA |
| Analog inputs |
1 analog input |
| Open or Close loop |
Open loop or Closed loop with absolute or incremental encoder |
| Step resolution |
Stepless Control Technology (65536 emulated positions per turn) |
| Safety protections |
Over / under-voltage, over current, over temperature,short-circuit phase / phase and phase / phase ground |
| Operative temperature |
0 [°C]÷ 40 [°C] |
| Storage temperature |
-25 [°C] ÷ +55 [°C] |
| Humidity |
5 [%] ÷ 85 [%] |
| Protection class |
IP20 |
| Dimensions H x L x W |
196.6 [mm] x 47.0 [mm] x 136.6 [mm] |
| Weight |
0,55 [Kg] |
| Software settings and connections |
Service SCI interface for real time programming and debug |
Certifications
Functions
● Drive control through commands by Master Controller. Suitable for multi axes systems (up to 127 drives). Built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces Master Controller workload.
● Wide range of Positioning Control Modes (homing, relative, absolute, target)
● Autonomous management of the firmware for the execution of the homing, of the target movement with relative or absolute quota and for the generation of the ramp profiles
● Torque mode for operation with torque limitation
● Speed control thanks to digital inputs or analog input.
● Electronic CAM with advanced programming of internal profiles inside the drive
● Electric shaft with encoder or analogue input with variable tracking ratio (Electric Gear)● Fast inputs and outputs for motor’ start & stop and event synchronization for high speed response applications such as labeling, nick finder, flying saw etc.
● Possibility to synchronize the movements in multiaxis systems, even without fieldbus
● Enabling and on-the-fly changing of the motion control modes
● Closed loop of torque, speed and position with incremental or absolute multiturn encoder
Main Features
● Can be powered from the main AC supply (230 Vac)
● Vector control
● UL recognized certified
● Safe Torque Off inputs (STO) SIL3/PLe
● Serial Service for real time programming and debugging
● New e3PLC Programming Environment, easy and intuitive
CONNECTORS KIT
| Codice | Descrizione |
| SW5A9KIT-C2 | Connectors kit for cabling |
SOFTWARE KIT FOR CONFIGURATION
| Code | Description |
| SW5_SERV00-EE | Kit for programming the drive with e3PLC Studio software + 200 cm service serial cable and serial/USB converter |
SW5 is a new line of
programmable vectorial drives belonging to the Titanio family, characterised by innovative performance. Built by integrating the
new ‘Else - Error Less Servo Efficient technology’ with the accurate control of the sinusoidal current, these drives allow to command stepper motors
also in closed loop of torque speed and position, with a drastic noise reduction, less heating and extremely smooth movements. Suitable for driving 2-phase hybrid stepper motors, they can be coupled mainly with the series of motors from 2.3” to 4.2”.
Completely digital and made using Arm Core M4 technology, SW5 drives offer exceptional reliability combined with mechanical compactness and a competitive price.
They can be used
in a 'stand-alone' mode or in many types of machines where there is already a fieldbus master controller to control single or multi-axle systems. Their use is of the 'general purpose' type and they are particularly suitable in labelling machines, laser cutters, pick-place devices, engraving tables, etc. or in any case in all applications in which not only versatility, precision and speed are required, but also
smooth and silent movements as in the medical field.