DCM00-v00c0400

Power supply voltage	12 [Vcc] ÷ 24 [Vcc]
Output current	0 [A/ph rms] ÷ 0.5 [A/ph rms] 0 [A/ph peak] ÷ 0.7 [A/ph peak]
Control mode	Serial RS485 Modbus RTU
Power stage	Bipolar chopper H-bridge at 40 kHz.
Digital inputs	3 digital inputs 5 Vdc 300 kHz configurable as NPN or PNP.
Digital outputs	1 digital output 5 Vcc NPN transistor output for Fault.
Analog inputs	1 analog input 0 ÷ 10 Vdc.
Open or Close loop	Open loop
Step resolution	From full step to 1/128 step.
Safety protections	Under/Over voltage, Over current, Over temperature.
Status monitoring	Power led and status led.
Operative temperature	0 [°C]÷ 50 [°C]
Storage temperature	0 [°C] ÷ 55 [°C]
Humidity	0 [%] ÷ 90 [%]
Protection class	IP20
Dimensions H x L x W	14.0 [mm] x 67.0 [mm] x 63.0 [mm]
Weight	0.25 [Kg]

Functions

● Controllable via modbus communication, ck / dir management, motor movements management with internal clock or via analogue input;

● firmware upgradable;

● smoothing function;

● configuration using the SL-Monitor development tool software via Serial Modbus.

Main Features

● With Advanced Safety Features: √ tested for direct unit installations √ monitoring and management of faults

√ low motor vibrations

√ compact size

√ low mechanical noise

√ no resonance

√ low heat production

√ high reliability

√ excellent EMC properties

√ simple setup

√ safety protections

√ high speed and torque

DCM is a completely digital drive, characterised by a compact design and optimised to reduce overall dimensions and costs, which implement a control of the latest generation phase currents able to drive stepper motors silently, without vibrations even at low rotation speeds, minimising motor heating. Equipped with digital and analogue I/O, these drives can be controlled directly via PLC or PC through digital frequency, analogue references or fieldbus, or, being configurable by IDE for PC, their software can be customised according to the needs of each customer. Open also to hardware customisation, these drives are ideal in applications that require the optimisation of costs and overall dimensions, combined with a direct, silent and vibration-free control of the load over a wide range of speeds.

Download area for DCM00-v00c0400

• 3D drawing DCM00-v00
• Datasheet M5A_DCM_drives_line_GB

Technologies