SW5D3070R4T2-35c0A90

Power supply voltage 24 [Vcc] ÷ 80 [Vcc]
Separated logic power supply 24 [Vcc] ÷ 24 [Vcc]
Output current 0.0 [A/ph rms] ÷ 7.1 [A/ph rms] 0.0 [A/ph peak] ÷ 10.0 [A/ph peak]
Control mode Powerlink (Multiprotocol)
Feedback Interface isolated interface for multiturn absolute encoder 5V Endat2.2, BiSS-C or SSI
Mounting Wall mounting
Digital inputs 8 optoisolated
Digital outputs 4 optoisolated
Analog inputs 2 isolated
Analog outputs 2 isolated
Open or Close loop Open loop or Closed loop with multiturn absolute encoder
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections over/under-voltage, over current, overheating, short circuit between motor phase to phase and phase to ground
Operative temperature 0 [°C]÷ 40 [°C]
Storage temperature -25 [°C] ÷ +55 [°C]
Humidity 5 [%] ÷ 85 [%]
Protection class IP20
Dimensions H x L x W 160.0 [mm] x 53.0 [mm] x 115.0 [mm]
Weight 0.47 [Kg]
Software settings and connections USB service interface for configuration and debug in real time

Certifications

Certifications CE, RoHS, REACH, UL

Functions

● 'Stand Alone' mode, programmable and with PLC functionalities integrated. 3PLC integrates PLC, Motion Module, Process Module and drive in one device.

● Wide range of Positioning Control Modes (homing, relative, absolute, target)

● Drive programming through service USB interface and e3PLC Studio IDE software

● Autonomous management of the firmware for the execution of the homing, of the target movement with relative or absolute quota and for the generation of the ramp profiles

● Torque mode for operation with torque limitation

● Speed control thanks to digital inputs or fieldbus

● Electronic CAM with advanced programming of internal profiles inside the drive● Electric shaft with encoder or analogue input with variable tracking ratio (Electric Gear)

● Fast inputs and outputs for motor’ start & stop and event synchronization for high speed response applications such as labeling, nick finder, flying saw etc.

● Possibility to synchronize the movements in multiaxis systems, even without fieldbus

● Enabling and on-the-fly changing of the motion control modes

● Closed loop of torque, speed and position with multiturn absolute encoder

● Drive control through commands by Master Controller. Suitable for multi axes systems (up to 127 drives). Built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces Master Controller workload.

Main Features

● Multiprotocol: software configuration of the communication protocol as required by the application

● Powerlink fieldbus

● Easily programmable with e3PLC Programming Environment

● Outputs to drive two independent motors

● USB serial for real time drive configuration and debug

● Closed loop of speed, torque and position

● Vectorial control for smooth and silent movements


   CONNECTORS KIT
    

 Codice       Descrizione                     
 SW5D3KIT-C0                                          Connectors kit for cabling                               

   SOFTWARE KIT FOR PROGRAMMING

 Code       Description                     
 USBC_SERV0EE-1M      Kit for the drive programming with e3PLC Studio IDE software + 100 cm service USB cable


SW5 is a new line of programmable vectorial drives belonging to the Titanio family, characterised by innovative performance.
Built by integrating the new ‘Else - Error Less Servo Efficient technology’ with the accurate control of the sinusoidal current, these drives allow to command stepper motors also in closed loop of torque speed and position, with a drastic noise reduction, less heating and extremely smooth movements.
Suitable for driving 2-phase hybrid stepper motors, they can be coupled mainly with the series of motors from 2.3” to 4.2”. Completely digital and made using Arm Core M4 technology, SW5 drives offer exceptional reliability combined with mechanical compactness and a competitive price.
They can be used in a 'stand-alone' mode or in many types of machines where there is already a fieldbus master controller to control single or multi-axle systems.
Their use is of the 'general purpose' type and they are particularly suitable in labelling machines, laser cutters, pick-place devices, engraving tables, etc. or in any case in all applications in which not only versatility, precision and speed are required, but also smooth and silent movements as in the medical field.


Stepper drives > Two phases > Programmables > Titanio > SW5D3070R4T2-35c0A90
Technologies

Find out what Safe Torque Off STO is and how it works on our drives for stepper motors and brushless motors!

Internal production of our drives is our strenght, as it means Made in Italy quality for our customers. Find out what happens "behind the scenes".

Ever Elettronica has developed multiprotocol drives for both brushless and stepper motors in which by downloading ad hoc firmware you can change the communication protocol as needed for your application.

POWERLINK is a standard Ethernet-based communication protocol; the ability to operate both time-critical and nontime-critical processes with the same bus has encouraged its widespread use - particularly in those applications with a significant motion part.

Ever Elettronica programmable drives represent something new: they integrate a real PLC on the drive to be able to create complex automations with a single device.

Thanks to the ELSE technology integrated in the Ever Elettronica’s drives motors current control is so high that vibrations, resonances and noises don’t exist anymore.

Functions

Fieldbus drives with autonomous functioning that, by integrating advanced PLC and motion controller functions in one single device, programmable by the user with the IDE for Windows PC and e3PLC, allows to reduce the traditional machine control solution.

Connections

Connection for programming the unit and parameters configuration is made through USB service interface and the IDE e3PLC Studio that allow easy and quick programming, a real time debug and a supervision of each system.

Stepper drives > Two phases > Programmables > Titanio > SW5D3070R4T2-35c0A90

Fieldbus

Stepper drives > Two phases > Programmables > Titanio > SW5D3070R4T2-35c0A90

Related products to SW5D3070R4T2-35c0A90
High Efficiency 2 phases hybrid stepper motor.

High Efficiency 2 phases hybrid stepper motor.

IDE environment for the Linea Titanio drives programming.

IDE environment for the Linea Titanio drives programming.

High Efficiency 2 phases hybrid stepper motor IP65 with absolute encoder.

High Efficiency 2 phases hybrid stepper motor IP65 with absolute encoder.

Contacts Newsletter